Tracked Spider Crane YXC120: Compact Lifting Equipment for Narrow Access and Challenging Workspaces

The tracked spider crane YXC120 is a compact 1.2-ton spider crane designed for lifting applications in restricted spaces. Its product introduction highlights a small body, strong performance, and a balance of power, precision, and portability. The machine can pass through narrow entrances and work in indoor or rooftop spaces where traditional cranes may not be able to operate.

The YXC120 has a stated crane capacity of 1.2 tons at a 1.5-meter working radius. Its maximum working radius is 5.35 meters with a stated lifting capacity of 0.05 tons, while its maximum lifting height on the ground is 6.3 meters. These figures provide a starting point for evaluating the machine's lifting range.

YXC120 Compact Spider Crane for Restricted Access

Access limitations are common in many construction and maintenance projects. A lifting machine may need to enter a building through a narrow doorway, move through a confined work area, or operate in a location where larger equipment cannot be positioned.

The YXC120 is introduced as a 1.2-ton spider crane with a compact body. Its product description specifically highlights the ability to pass through narrow entrances and work in indoor or rooftop spaces where traditional cranes cannot operate.

This makes access one of the key considerations when reviewing the machine. However, the available product information does not provide its overall dimensions, transport width, machine weight, or minimum entrance clearance. These details should be confirmed with the manufacturer before planning delivery or installation.

For buyers evaluating a tracked spider crane, the relationship between the machine's physical dimensions and the intended work area is important. A suitable lifting machine needs to fit the available access route and operating space.

1.2 Ton Crane Capacity at 1.5 Meters

The YXC120 has a stated crane capacity of 1.2 tons × 1.5 meters. The supplied imperial equivalent is 2,645 pounds × 4.9 feet.

This specification provides a reference for the crane's rated lifting capacity at the stated working radius. It is one of the main product parameters for businesses reviewing compact lifting equipment.

The supplied capacity information is summarized below:

The stated capacity applies to the specified radius and should not be interpreted as the maximum load at every working position. A crane's permitted lifting capacity can change according to the working radius, boom configuration, and operating conditions.

Before using the YXC120 for a particular lifting task, operators should consult the manufacturer's load chart and operating instructions. The available information does not include a complete load chart or additional capacity data.

Maximum Working Radius of 5.35 Meters

The YXC120 has a maximum working radius of 5.35 meters, equivalent to 17.6 feet. At this working radius, the supplied lifting capacity is 0.05 tons, or 110 pounds.

Working radius is an important measurement in crane selection because it describes the distance between the crane's lifting position and the load. A project may require the machine to reach across a floor, position materials near a building structure, or handle a load away from its setup point.

The YXC120's stated maximum working radius is:

The capacity figure at the maximum working radius is particularly relevant when reviewing lifting requirements. Buyers should use the manufacturer's complete load chart to determine the permitted load at other radii.

The available product information does not specify the full lifting capacity range, boom length, or working radius under different configurations. These details should be confirmed before selecting the crane for a specific job.

Maximum Lifting Height on the Ground

The YXC120 has a maximum lifting height on the ground of 6.3 meters, equivalent to 20.67 feet. This is the stated maximum lifting height provided in the product information.

Lifting height can be an important consideration in construction, installation, and maintenance work. Depending on the project, materials may need to be raised to a particular level or positioned at a height above the ground.

For the YXC120, the stated height specification is:

Maximum lifting height on the ground: 6.3 m (20.67 ft)

The available information does not provide the load capacity at maximum height, boom angle, or the conditions associated with this figure. Buyers should request the relevant technical specifications when assessing the crane for a particular lifting operation.

The maximum height should not be treated as a universal lifting capacity. The actual allowable load depends on the operating conditions and manufacturer's instructions.

Indoor and Rooftop Applications

The YXC120 is described as suitable for indoor and rooftop spaces where traditional cranes cannot operate. These applications are associated with projects that require compact lifting equipment and careful planning around access limitations.

Indoor lifting work may involve construction, equipment installation, maintenance, or material handling. Rooftop projects can also require equipment that is compatible with the available access route and working area.

The manufacturer's product introduction highlights these application environments. However, no specific indoor project, rooftop installation, or customer case has been supplied. The actual suitability of the machine depends on the conditions of the intended site.

For indoor applications, buyers should consider entrance dimensions, floor loading, working clearance, and the method used to move the machine into the building. For rooftop applications, structural loading, access, setup space, and applicable safety requirements should be assessed.

These factors are important when determining whether a compact crane is appropriate for a particular project.

Power, Precision, and Portability

The YXC120 product introduction emphasizes a balance of power, precision, and portability. These characteristics describe the product's intended design focus.

Power is relevant to lifting performance, while precision can be important when positioning materials or equipment in a restricted work area. Portability is also a consideration when the machine needs to be moved into or around a jobsite.

The product information identifies the YXC120 as a compact spider crane but does not provide specific details about its power source, control system, movement mechanism, or transport configuration.

For this reason, buyers should confirm the machine's technical characteristics with the manufacturer. The supplied information does not establish specific operating speeds, control accuracy, travel performance, or transport dimensions.

When reviewing a tracked spider crane, businesses should consider how the machine will be transported, positioned, and operated in the intended environment.

Tracked Spider Crane Selection for Narrow Workspaces

The term tracked spider crane refers to a compact crane configuration associated with restricted-access lifting applications. The YXC120 product introduction describes a spider crane that can pass through narrow entrances and work in indoor or rooftop spaces.

The supplied product information does not explicitly confirm the YXC120's track configuration, track material, travel system, or ground-contact design. Therefore, buyers should confirm these details with the manufacturer rather than assuming specific tracked features.

For projects requiring a tracked machine, the travel and setup characteristics should be reviewed alongside the lifting specifications. Access conditions, ground surfaces, operating space, and load requirements all influence equipment selection.

The YXC120 provides a defined lifting capacity and working range for evaluation, while additional technical details are needed to determine its suitability for a particular application.

Considerations Before Purchasing a Compact Spider Crane

A lifting machine should be selected according to the actual requirements of the jobsite. The YXC120's stated capacity of 1.2 tons × 1.5 meters and maximum working radius of 5.35 meters provide important references for reviewing its lifting capabilities.

However, these figures should be considered alongside the complete technical documentation. The appropriate crane configuration depends on the load, radius, height, and operating conditions.

Before purchasing the YXC120, buyers may wish to confirm:

• Overall dimensions and minimum entrance clearance.
• Machine weight and transportation requirements.
• Complete load chart for different working radii.
• Maximum lifting height under specified conditions.
• Track and travel system specifications.
• Ground and rooftop setup requirements.
• Outrigger arrangement and working space.
• Power source and operating requirements.
• Safety instructions and maintenance information.

These details can help businesses determine whether the crane matches their intended application.

YXC120 for Compact Lifting Equipment Applications

The YXC120 is a 1.2-ton spider crane with a compact design and a stated focus on indoor, rooftop, and narrow-access workspaces. Its product introduction highlights power, precision, and portability, while the supplied specifications provide references for lifting capacity, working radius, and height.

For businesses looking for a tracked spider crane, the YXC120 offers a specific compact crane model to review. Its stated capacity of 1.2 tons × 1.5 meters, maximum working radius of 5.35 meters, and maximum lifting height of 6.3 meters provide a basis for evaluating its lifting range.

The actual suitability of the machine depends on its verified technical specifications and the conditions of the intended project. Buyers should contact the manufacturer for complete product information and confirm the applicable operating requirements before placing an order or arranging a lifting operation.